ZyXEL Confidential
340AGL4C0.doc
4/41
Condition: In GUI-
＞
Security-
＞
Firewall-
＞
Rules, add rules in 4 packet directions,
when we change any rule ”Active” check box in one of the directions, the others’ will be
changed accordingly.
7. [BUG FIX] SPRID: 060915965
Symptom: When add remote node in GUI DUT will crash.
Condition: step1.WAN page set PPPOE and PPPOE passthought click open
step2. More connection set PPPOE apply then it will crash.
8. [BUG FIX] SPRID: 060915973
Symptom: Wireless QoS has problem.
Condition: 1.When use Wireless QoS Application Priority,edit one rule ,Dest
Port=65535 .
2.Use CLI command we can’t send packets to the port.
9. [BUG FIX] SPRID: 060915971
Symptom: In GUI , Wireless shows error message in Packet Status interface.
Condition: when 4x enable ,in Packet Status interface still show 54M.
10. [FEATURE CHANGE]
Use new compressed method to compress firmware.
11. [ENHANCEMENT]
In GUI status pages display four LAN ports status and DSL firmware version
12. [ENHANCEMENT]
Update modem code to Version 7.0.4.0
13. [ENHANCEMENT]
Supports 1530 bytes frame pass through in RFC1483 bridge mode.
14. [BUG FIXED] SPRID: 061121146
Symptom:Reboots problems in traffic jam conditions and huge NAT entries
Condition: Step1:config one PVC dynamic get IP and one PVC static IP
Step2: config one static route rule ,gateway point to static WAN IP.
Step3:run Portscan software in LAN PC,when scan port >10000, DUT will reboot
15.
[ENHANCEMENT]
IGMP Snooping enable/disable setting can save to SPT
，
configured via CI command:
sys tripleplay igmpsnp enable/disable
Modifications in V 3.40(AGL.4)b1 | 07/17/2006
1. [ENHANCEMENT]
Support APDK 6.3.1.26
2. [ENHANCEMENT]
Triple play V2 for 6996I
3.[ENHANCEMENT]
Update TI modem code to D6.0.4.0
4. [ENHANCEMENT]
Add G+ in wireless status. Remove "Active" in LAN and WLAN status.
5. [BUG FIX] SPRID: 060706288
Symptom: when edit a BM rule, if the bandwidth of the child is larger than the
bandwidth of the parent, it can be saved.
