P-660HW-D Quick Start Guide
12
OTIST
ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the
SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-660HW-D.
Note:
If you enable OTIST but select
Disable wireless security
using the wireless wizard, the P-
660HW-D will create a WPA-PSK automatically.
If you enable OTIST and select
Manually assign a WEP key
using the wireless wizard, the P-
660HW-D will replace the WEP key with a WPA-PSK.
Enable OTIST only if your wireless clients support WPA and OTIST.
You must enable OTIST on the P-660HW-D and all wireless clients within three minutes in any order.
To enable OTIST on the P-660HW-D, you can either use the wizard (see section
) or hold in the
RESET
button (see section
) for one to five seconds. Do not hold the
RESET
button in for too long, as this will reset
the P-660HW-D to the factory defaults.
To enable OTIST on wireless clients, click
Star
t in the
Adapter
screen. The
Setup Key
is 01234567 by default.
If you have previously saved a setup key on the P-660HW-D, use it instead of the default.
For more information, see
Wireless LAN
in the User's Guide.
Troubleshooting
1
If you cannot access the web configurator,
• Your computer may be set to use a static IP address in a different subnet from the ZyXEL device. See the
appendix in the User’s Guide for information on setting up your IP address.
• If you are using Internet Explorer in Windows XP or Windows Server 2003, make sure you allow pop-up
windows, JavaScripts and Java permissions or set the Internet security level lower than
High
in Internet
Explorer (in Internet Explorer, click
Tools > Internet Options > Security > Custom Level...
). See the
appendix in the User’s Guide for more information.
2
If you cannot access the Internet when your computer is connected to the
ETHERNET
port, follow these
steps.
A)
Check the lights on the front panel. If they are different from what is described in section
, make sure
the P-660HW-D is correctly connected. (See section
.) If the lights are still different, turn off the device,
wait a few seconds, and turn it on again.
B)
If your ISP gave you the information, make sure you enter the correct information. For example, if your
account has a user name and password, make sure you type it correctly. In addition, if you are not sure
which encapsulation your ISP uses, contact your ISP. If your ISP did not give you Internet connection
information, follow the steps in section
C)
If you are using a new Internet account, contact your ISP to make sure it is active.
D)
If you still have problems, see
Troubleshooting
in the User’s Guide.
