ZyXEL Communications P-324, User Manual

Page: 306 / 352

Prestige 324 User’s Guide
Call Scheduling 29-1
Chapter 29
Call Scheduling
Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate when a
remote node should be called and for how long.
29.1 Introduction to Call Scheduling
The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a videocassette recorder (you
can specify a time period for the VCR to record). You can apply up to 4 schedule sets in
Menu 11.1 —
Remote Node Profile . From the main menu, enter 26 to access Menu 26 — Schedule Setup as shown next.
Figure 29-1 Menu 26 Schedule Setup
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3
and 4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3
and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
Menu 26 - Schedule Setup
Schedule
Set #
------
1
2
3
4
5
6
Name
-----------------
______________
______________
______________
______________
______________
______________
Schedule
Set #
------
7
8
9
10
11
12
Name
------------------
______________
______________
______________
______________
______________
______________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel: