P-2304R-P1 Series Quick Start Guide
10
4
Click
Apply
.
The P-2304R-P1 automatically restarts. When the
POWER
light stops blinking and stays on, follow the
directions in section
to log in to the web configurator again. However, use the
Management IP Address
you set up in step
, instead of
http://192.168.1.1
. If your computer’s IP address is in a different subnet, follow
the directions in the appendices of the User’s Guide to change your computer’s IP address.
4 Phone Calls
Follow these directions to make calls over the Internet.
• If you want to dial a SIP number that only uses numbers (for example, “12345”), dial the number on your
phone’s keypad. You can also set up a speed-dial entry, if you want. See the User’s Guide for instructions.
• If you want to dial a SIP number that uses letters or if you want to make a peer-to-peer call, set up a speed-dial
entry first. See the User’s Guide for instructions. Then, dial the speed-dial number to make the call.
• If you want to call regular telephone numbers, use your VoIP service provider’s dialing plan.
• If you want to call the VoIP phone(s) that is connected to the P-2304R-P1 from a regular phone, use your VoIP
service provider’s dialing plan. The P-2304R-P1 must be on.
