P-2302HWUDL-P1 Quick Start Guide
9
STEP 3: WAN
Select one connection type from the drop-down list box. Check with your ISP to make sure you use the correct
type:
1 Ethernet
2 PPP over Ethernet
Note:
If you were given Internet access settings, enter them in the following fields. Otherwise leave the
default settings and just click
Next
.
A
Select
Ethernet
as your WAN connection type.
B
Select
Get automatically from your ISP
if your ISP did not assign you a fixed IP address. Skip to
C
.
Or
Select
Use fixed IP address provided by your ISP
to give the P-2302HWUDL-P1 a fixed, unique IP address.
Go to
B1
.
B1
If you select
Use fixed IP address provided by your ISP
,
enter a WAN IP address, WAN IP Subnet Mask
and the neighboring device’s IP address given by your ISP.
If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and
just click
Next
.
C
Select
Factory Default
to use the factory assigned default MAC address and click
Next
. Then
click
Apply
to
save your changes. The OTIST in Progress screen appears if you enable OTIST in the previous wizard
screen. Wait for the P-2302HWUDL-P1 to finish transferring OTIST settings.
D
Click
Finish
to complete the wizard.
Ethernet Connection
