P-2302HWUDL-P1 Quick Start Guide
3
2 Hardware Connections - P-2302HWUDL-P1
1 WAN
: Use an Ethernet cable to connect the DSL modem to this port.
2 LINE
: Use the green PSTN cable to connect the
TEL
or
PHONE
jack on a splitter to this port. If no splitter is
provided connect the telephone jack to this port.
Note:
When the ZyXEL Device does not have power, only the phone connected to the
PHONE 1
port
can be used for making calls. Ensure you know which phone this is, so that in case of emergency
you can make outgoing calls.
3 ETHERNET 1-4
: Use an Ethernet cable to connect a computer to this
port for initial configuration and/or
Internet access.
4 PHONE 1-2
: Use telephone cables (and any telephone adaptors provided with your P-2302HWUDL-P1) to
connect your telephones to these ports. If you only have one telephone, you should use port 1.
