ZyXEL Communications Omni 56K Smart, User Manual

Page: 62 / 70

Omni 56K Smart User’s Guide
5-28 Command Sets
Table 5-13 Extended S-Registers "ATSn=x"
COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF.
S31= 0-255 0-FF Holds the ASCII decimal value of the XON +017
S32= 0-255 0-FF Holds the ASCII decimal value of the XOFF +019
bit dec hex Bit-mapped register. +032
1 2 2 Disables aborting from the terminal during
modem handshaking.
3 8 8 Add 16dB attenuation to the leased line
transmission power.
5 32 20 Enable Selective Reject in V.42 (default).
S35=
7 128 80 Enable extended numerical result codes from 50
to 65 when an error corrected connection is
made. Use with ATV0 (see result code table). V0S23.6
bit dec hex Bit-mapped register. +000
0 1 1 Repeatedly dials the default number if not
connected. *Dn, S29
3 0 0 CD tracks the carrier (default). &C0
3 8 8 The DCD ON/OFF sequence follows UNIX
standard, DCD ON before connect message is
sent, DCD off after the last DCE response is
sent. &C1,
S21.4
4 16 10 Auto-mode fax receiving is disabled, hangs up if
a fax call is received (default). &N0
S38=
5 32 20 Disable MNP5 negotiation. &Kn
bit dec hex Bit-mapped register. +032 S39
2 4 4 Reverse the answers. Answer in originating
mode. ATA
bit dec hex Bit-mapped register. +000
1 2 2 No result code is displayed in answer mode. Q2
2 4 Enables caller ID detection.
3 8 Enables type 1 ring detection.
S40=
4 16 Enables type 2 ring detection.