manualshive.com logo in svg

ZyXEL Communications NU-AP699E9N3, User Manual, Page: 56 / 151

Share
Download
ZyXEL Communications NU-AP699E9N3 User Manual Download Page 56

NU-AP699E9N3 Wireless Router User Manual 

47 

 

 

Release

: Click the button and NU-AP699E9N3 sends a request to the ISP 

for releasing the IP address, the subnet mask, the default gateway, and DNS 

server settings. 

 

 

Renew

: Click the button and NU-AP699E9N3 dynamically obtains an IP 

address, a subnet mask, the default gateway, and DNS server settings from 

the ISP. The information will be displayed in this page. 

For details of WAN connection modes, refer to section 8.4.2 “WAN Interface 

Settings”. 

8.1.2   Clients List

 

Choose 

Running Status

 > 

Clients List

 and the 

Clients List

 page is displayed. 

 

This page displays information of computers connected to NU-AP699E9N3, 

including the IP adress and MAC address of each computer. 

8.2   Setup Wizard 

For settings, refer to section 6.2 “Router Mode Configuration”. 

8.3   Mode Setting   

Click 

Mode Settings

 and the 

Mode Settings

 page is displayed. 

Summary of Contents for NU-AP699E9N3
























































































































































Reviews:

No comments