NU-AP699E9N3 Wireless Router User Manual
100
9.4.2 DHCP Server
Choose
Network Settings
>
DHCP Server
and the
DHCP Server
page is
displayed.
DHCP refers to Dynamic Host Configuration Protocol. If
Use Device as DHCP
Service
is selected, NU-AP699E9N3 automatically assigns IP addresses to
comupters in the LAN. Users do not need to configure TCP/IP protocol paramters
such as the IP address, the subnet mask, the gateway, and the DNS server
information for computers connected to the router’s LAN.
9.4.2.1 Using the Router as a DHCP Server
Use Router as DHCP Server
: If you select the
Use Router as DHCP
Server
check box, NU-AP699E9N3 serves as a DHCP server to
automatically assign IP addresses to computers connected to it.
Starting IP Address
/
Ending IP Address
: Set the starting and ending IP
addresses to specify a pool of IP addresses to be assigned by the DHCP
server. After you set
Starting IP Address
/
Ending IP Address
, hosts in the
LAN obtain IP addresses that are in the range of the starting and ending IP
addresses.