Chapter 1 Introduction
NAP Series User’s Guide
8
1.4 Hardware Connections
See your Quick Start Guide for information on making hardware connections.
1.5 LEDs
The LEDs of your NAP303 or NAP203 can be controlled by using the Suppression feature such that the
LEDs stay lit (ON) or OFF after the device is ready.
Following are LED descriptions for the NAP series models.
1.5.1 NAP303
The LEDs will stay ON when the NAP303 is ready. You can change this setting through the NCC (Nebula
Control Center).
Figure 2
NAP303 LEDs