Chapter 4 Network
NAP Series User’s Guide
21
Figure 12
Configuration > Network > IP Setting
Each field is described in the following table.
4.3 VLAN
This section discusses how to configure the NAP’s VLAN settings.
Table 8 IP Setting
LABEL
DESCRIPTION
IP Address
Assignment
Get
Automatically
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and gateway manually.
IP Address
Enter the IP address for this interface.
Subnet Mask
Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
Gateway
Enter the IP address of the gateway. The NAP sends packets to the gateway when it does
not know how to route the packet to its destination. The gateway should be on the same
network as the interface.
DNS Server IP
Address
Enter the IP address of the DNS server.
Apply
Click
Apply
to save your changes back to the NAP.
Reset
Click
Reset
to return the screen to its last-saved settings.