Chapter 18 Classifier
MGS-3712/MGS-3012F User’s Guide
145
Ethernet
Type
Select an Ethernet type or select
Other
and enter the Ethernet type number in
hexadecimal value. Refer to
for information.
Source
MAC
Address
Select
Any
to apply the rule to all MAC addresses.
To specify a source, select the second choice and type a MAC address in valid MAC
address format (six hexadecimal character pairs).
Port
Type the port number to which the rule should be applied. You may choose one port only
or all ports (
Any
).
Destination
MAC
Address
Select
Any
to apply the rule to all MAC addresses.
To specify a destination, select the second choice and type a MAC address in valid MAC
address format (six hexadecimal character pairs).
Layer 3
Specify the fields below to configure a layer 3 classifier.
DSCP
Select
Any
to classify traffic from any DSCP or select the second option and specify a
DSCP (DiffServ Code Point) number between 0 and 63 in the field provided.
IP
Protocol
Select an IP protocol type or select
Other
and enter the protocol number in decimal value.
Refer to
for more information.
You may select
Establish Only
for
TCP
protocol type. This means that the Switch will
pick out the packets that are sent to establish TCP connections.
Source
IP
Address/
Address
Prefix
Enter a source IP address in dotted decimal notation.
Specify the address prefix by entering the number of ones in the subnet mask.
A subnet mask can be represented in a 32-bit notation. For example, the subnet mask
“255.255.255.0” can be represented as “11111111.11111111.11111111.00000000”, and
counting up the number of ones in this case results in 24.
Socket
Number
Note: You must select either
UDP
or
TCP
in the
IP Protocol
field before
you configure the socket numbers.
Select
Any
to apply the rule to all TCP/UDP protocol port numbers or select the second
option and enter a TCP/UDP protocol port number. Refer to
for
more information.
Destination
IP
Address/
Address
Prefix
Enter a destination IP address in dotted decimal notation.
Specify the address prefix by entering the number of ones in the subnet mask.
Socket
Number
Note: You must select either
UDP
or
TCP
in the
IP Protocol
field before
you configure the socket numbers.
Select
Any
to apply the rule to all TCP/UDP protocol port numbers or select the second
option and enter a TCP/UDP protocol port number. Refer to
for
more information.
Add
Click
Add
to insert the entry in the summary table below and save your changes to the
Switch’s run-time memory. The Switch loses these changes if it is turned off or loses
power, so use the
Save
link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Table 42
Advanced Application > Classifier (continued)
LABEL
DESCRIPTION
Summary of Contents for MGS-3712
