ZyXEL G-170S User’s Guide
46
Chapter 3 ZyXEL Utility Configuration
3
If you select
Infrastructure
network type in the first screen, select
WEP
,
WPA
,
WPA2
,
WPA-PSK
,
WPA2-PSK
or
802.1x
from the drop-down list box to enable data
encryption. If you select
Ad-Hoc
network type in the first screen, you can only use
WEP
encryption method.
Otherwise, select
DISABLE
to allow the G-170S to communicate
with the access points or other peer wireless computers without any data encryption and
skip to step
6
.
Figure 23
Profile: Security Setting: Encryption Type
4
The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the G-170S. Refer to
Section 3.2.2 on page 36
for detailed information on
wireless security configuration.
Figure 24
Profile: Security Setting
5
Specify a wireless protocol. Select
802.11b
to have the G-170S connect to an IEEE
802.11b wireless device. Select
802.11g
to have the G-170S connect to an IEEE 802.11g
wireless device. Select both to have the G-170S connect to either an IEEE 802.11g or
IEEE 802.11b wireless device.
Summary of Contents for G-170S
