ZyXEL Communications ES-1528 - V1.12, User Manual, Page: 55 / 170

ES-1528 User’s Guide
55
C
H A P T E R
6
Port Settings
This chapter describes how to view and configure the port settings on the switch.
6.1 Port Status
Use this screen to view switch port settings. Click System > Port in the navigation panel to
display the Port Status screen.
Figure 27 Port Status
The following table describes the labels in this screen.
Table 8 Port Status
LABEL DESCRIPTION
Refresh Click this to update the PORT Status screen.
Port This identifies the Ethernet port. Click a port number to display the Port
Configuration screen (refer to Section 6.2 on page 56 .)
Link Status This field displays the link status of the port. Up , if the port is enabled and active or
Down , if the port is disabled or not connected to any device.
Speed Duplex This field displays the speed either 10Mbps , 100Mbps or 1000Mbps and the duplex
mode Full or Half .