manualshive.com logo in svg

ZyXEL Communications ES-1528 - V1.12, User Manual, Page: 32 / 170

Share
Download
ZyXEL Communications ES-1528 - V1.12 User Manual Download Page 32

Chapter 2 Hardware Installation and Connection

ES-1528 User’s Guide

32

"

Do NOT block the ventilation holes. Leave space between devices when 
stacking.

For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front 
and 3.4 inches (8 cm) at the back of the switch. This is especially important for 
enclosed rack installations.

2.2  Mounting the Switch on a Rack 

This section lists the rack mounting requirements and precautions and describes the 
installation steps. 

2.2.1  Rack-mounted Installation Requirements

• Two mounting brackets.
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver. 

"

Failure to use the proper screws may damage the unit. 

2.2.1.1  Precautions 

• Make sure the rack will safely support the combined weight of all the equipment it 

contains.

• Make sure the position of the switch does not make the rack unstable or top-heavy. Take 

all necessary precautions to anchor the rack securely before installing the unit.

2.2.2  Attaching the Mounting Brackets to the Switch

1

Position a mounting bracket on one side of the switch, lining up the four screw holes on 
the bracket with the screw holes on the side of the switch.   

Figure 6   

Attaching the Mounting Brackets 

Summary of Contents for ES-1528 - V1.12











































































































































































Reviews:

No comments