ZyXEL Communications 802.11g Wireless Firewall Router 1-P-320W, Quick Start Manual, Page: 17 / 150

ENGLISH
17
Internet Access Setup Complete
4 Troubleshooting
Note: If your computer cannot automatically communicate with the device, then see the multimedia
tutorial on how to set up your computer to receive an IP address dynamically or give it a fixed
one in the range specified in section
4.1
.
If you have any Internet access problems, follow the
on-screen instructions.
Click
Finish to complete the Connection Wizard.
PROBLEM CORRECTIVE ACTION
None of the LEDs turn on when
you connect the Mer
produkthjalp finns pa http://
www.support.zyxel.se’s power. Make sure that you have the correct power adaptor connected to the Mer
produkthjalp finns pa http://www.support.zyxel.se, it is plugged into an
appropriate power source.
Check all cable connections. If the LEDs still do not turn on, you may have a
hardware problem. In this case, you should contact your local vendor.
Cannot access the Mer
produkthjalp finns pa http://
www.support.zyxel.se from my
computer. Check the cable connection from your computer to the Mer produkthjalp finns
pa http://www.support.zyxel.se.
If the Mer produkthjalp finns pa http://www.support.zyxel.se’s IP address has
changed, then enter the new one as the website address.
Make sure your computer’s IP address is in the same subnet as the Mer
produkthjalp finns pa http://www.support.zyxel.se’s IP address (see section
4.1 ).
Ping the Mer produkthjalp finns pa http://www.support.zyxel.se from a computer
on the LAN. Make sure your computer’s Ethernet adapter is installed and
functioning properly. In the computer, click
Start , ( All) Programs , Accessories
and then Command Prompt . In the Command Prompt window, type "ping"
followed by the Mer produkthjalp finns pa http://www.support.zyxel.se’s LAN IP
address (192.168.1.1 is the default) and then press [ENTER]. The Mer
produkthjalp finns pa http://www.support.zyxel.se should reply; otherwise see
section
4.1 .