Touchscreen User Manual – Issue 1
Zytronic X-Y Controller (Serial and USB)
40
Function
Description
Shows the current click mode emulation.
A full mouse click is the action of a pen down followed by a pen
up. In the following click emulations, where pen down is
specified but with no indication if it’s a left or right click, then
the Event Selector setting will dictate the pen (Left or Right)
selected.
Pen down then drag. Pen up at lift off
Drag then click at lift off.
Pen down and pen up at point of touch. No movement.
Left pen down then drag, left pen up at lift off. Stationary stylus
invokes right click. Interactive switch delay determines right
click delay. Visual notification indicates if visual feedback is
shown during right click countdown.
Adjust the mouse pointer settings defined within the operating
systems. Settings should be set to compliment touch usage,
especially the double click speed.
Test icons
Used to test right and double clicks. A green tick is shown if the
click test is successful
Event Selector
Some click mode emulations can generate one of two events, known as the primary or secondary
event. The Event Selector is used to indicate which event is being generated. The primary event is
normally set to Left pen and the secondary event is normally set to right pen. The Event Selector is
being revamped to be available in all OS and will be fully documented here when it is available. In the
meantime the UPDD Version 3 Windows Event Selector is used, which is distributed with UPDD V4.