Touchscreen User Manual – Issue 1
Zytronic X-Y Controller (Serial and USB)
22
After the installation process is completed it is recommended that you restart your computer.
The default installation path for the UPDD driver files is:
C:\Program Files\UPDD\
As well as installing the driver files the installation program also places shortcut links into the
Windows
Start, Programs, UPDD
folder. The shortcut links are to the following files:
¾
Calibrate
¾
Event Selector
¾
Settings
¾
Test
Finally the installation program also installs two Windows System Tray utilities located in the right
hand corner of the windows desktop. These two utilities are described below:
Event Selector Icon
This icon reflects the current setting of the Event State and, when selected, toggles between the
primary and secondary mouse click action (i.e. left and right click)
Pointer Device Manager
If the icon shows a red X it indicates that there are no active controllers (no PnP controllers are
detected or no other controllers are listed or they have been disabled (see Enabled option below). In
this state the touch screen will not be working until a PnP device is connected or disabled devices are
enabled.
A single click of the pointer Device Manager icon will list the menu items as described below. A
double click will open the UPDD Console.
Enabled:
Indicates if the device is enabled. A tick indicates that the device is enabled
and a cross indicates that it is disabled. This option can be used to temporarily
disable the pointer device. If more than one device is configured a sub menu
lists the devices to show the enabled state. If all devices are disabled or
inactive the system tray icon shows a red X to indicate to the user the touch
screen will not be working.
Calibrate:
Invokes the calibration procedure
Adjust Settings:
Invokes the UPDD Console