Zynex Medical InWave, User Manual

Page: 21 / 32

21
Warnings
Urge UI Mode
Warnings (Cont.)

Maximum RMS voltage (500 Ω load) = 2 V

Maximum RMS current (500 Ω load) = 4 mA

Maximum output power (500 Ω load) = 8 mW

Maximum RMS voltage (1 K Ω load) = 4 V

Maximum RMS current (1 K Ω load) = 4 mA

Maximum output power (1 K Ω load) = 16 mW

Maximum RMS voltage (2 K Ω load) = 5 V

Maximum RMS current (2 K Ω load) = 2.5 mA

Maximum output power (2 K Ω load) = 12.5 mW

A yellow LED indicator is provided next to the probe connector to show
that the unit is delivering energy for any non-zero value of stimulation
output (1 to 80 mA).

The long-term effects of chronic electrical stimulation are unknown.

Safety has not been established for the use of the InWave during
pregnancy.

Discontinue use of this device in the event of pain or bleeding.

Do not use this device in water.

Warning labels are legible from a distance of 30 cm or less, at a 90° angle
or less, and at 500 lux or greater luminous intensity.
Precautions

Stimulation settings should be based on the guidance of the prescribing
practitioner.

This device should be kept out of the reach of children.

This device should only be used with the vaginal probe
(s)
recommended for use by the manufacturer.

This device should not be used while driving, operating machinery, or
during any activity in which involuntary muscle contractions may put the
user at risk of injury.

Patients with implanted electronic devices, e.g., a cardiac pacemaker,
should not use this device unless advised by a physician.

Simultaneous connection of a patient to high frequency surgical equipment
may result in burns at the site of the vaginal probe and possible damage to
the stimulator.

Operations within close proximity (within one meter) of shortwave or
microwave therapy equipment may produce instability in the stimulation
output.