9
Probe Setup
Step 1
Remove probe from package.
Note:
Only
use
probes approved
by Zynex Medical that are
compatible
with the InWave.
P/N
400024
is provided as a standard accessory.
(Manufacturer’s P/N PR-03J)
See Page 27 for optional probes.
Step 2
Insert vaginal probe into the vagina as shown in Fig. 1 on page 10.
If needed, a small amount of water-based lubricant
should
be
applied to the tip of the probe to aid in insertion. Initial placement
of the vaginal probe and selection of the treatment program should
be performed under the guidance of a physician.
Note:
Overuse
of lubricant can cause lack of stimulation, and lead to ineffective
treatment.
See the directions included with the probe for further information.
Note:
Vaginal probes are for
single patient use only
.
CAUTION:
Do not insert or remove the probe when the device
is on. The device must be turned off prior to insertion or removal
of the probe.
Summary of Contents for InWave
Page 1: ...InWave User s Manual...
Page 2: ...This page intentionally left blank...
Page 10: ...10 Probe Setup cont Fig 1...
