Zylight F8-200, User Instructions

Page: 10 / 20

Flange mount IP65 AC Supply (P/N 13-17008)
Side AC Adapter Bracket (P/N 26-02034) AC Adapter Bag (P/N 19-02042)
F8-200 Fresnel Operations
Power Supply: The Zylight F8 Fresnel is powered through a standard 4-pin
XLR connector by either the included F8-200 Worldwide AC Adapter, or by the
Zylight F8-200 Battery Module.
AC Operation:
Use only the included F8-200 Worldwide AC Adapter (P/N
13-17006). During use the AC Adapter can be held by either the AC Adapter
Bag, or the Side AC Adapter Bracket.
NOTE: Some regions ship with the Flange Mount IP65 AC Supply as a
standard configuration (P/N# 13-17008). In this configuration, the AC
Adapter Bag and Side AC Adapter Bracket are replaced by (2) Flange mount
AC Brackets (P/N# 26-02039).
The AC Adapter Bag (P/N #19-02042) can hang on your light stand or another
secure location via the attached quick release strap. The AC cord passes
through the bottom of the bag with the 4-pin XLR exiting at the top. Be sure to
tighten the cinch cord to secure the Power Supply.
The Side AC Adapter Bracket (P/N #26-02034) can be used to mount the
Power Supply directly to the fixture’s yoke. Mount the bracket on either side
of the yoke via the two thumbscrews, place the AC Adapter into the bracket
with the AC connection facing downward, and secure with the Velcro strap.
Battery Operation: The F8-200 accepts DC voltage between 24 to 34 volts.
Input voltages of more than 34 volts will cause damage to the fixture! For
battery operation use only the Zylight F8-200 Battery Module (P/N #26-02036
for Gold Mount batteries, or P/N #26-02037 for V-Mount batteries) and two
fully charged 14.4v batteries with adequate rated output of at least 8.3 amps.
Failure to provide recommended voltages and amperages to the unit may
result in failure of the fixture or power sources. Please also observe correct
polarity. For reference, pin #1 is negative and pin #4 is positive.
Page 9