12
www.Zykronix.com
Figure 6-3 ZIP10 Connections Diagram with External Switch Button
Note:
The door electrical Lock requires separate powering follow by door lock manufacture’s requirements
6.3
Reset Device to Factory Default Configuration
ZIP10 Door phone can be reset to its Factory default configuration by using following actions:
1. Via WEB-Management interface (See Chapter 7.7.4)
2.
By using hardware ‘Factory Default Settings’ switch (See Figure 6-4 )
To set IP Door Phone to Factory Default Setting by using
hardware ‘Factory Default Settings’ switch:
Power off the device.
Put the switch to “DEFAULT” position.
Power on this device will restore the factory default.
o
LED Display can show the message
“Destination not set “if Day or Night destinations not specified
and case is open
o
LED Display Shows ’Set to default’ message if a case is closed
o
Power off the device.
Put the switch back to
“NORMAL” position
Power on the device
