ZX50 Series IP PBX
ZYCOO all rights reserved V3.1
8
*2
Attended Transfer
*
Disconnect Call
Login to the system
After connecting the IP PBX to the local area network, launch the web browser on a
computer which is in this local area network. Enter the IP address of the system (WAN
port IP address
http://192.168.1.100:9999,
LAN port IP address
http://192.168.10.100:
9999
). The start web page will appear like this:
Enter Username and password (default username is
admin
, password is
admin
), then
click “login”. Once the login is successful, the home page will be displayed:
Note:
1) you have to add a network segment same with the WAN port if your PC is not at
192.168.1.XXX.
2) For safety requirement, please modify the username and password after you login.
You can modify in this page:
“System”---“Management”
3)
Generally, based on the default setting, if user didn
’t do anything in 1 min after login,
system will reflect it
’s over time. If you want to continue operating, please login again.
If username and password are right, this following page will be displayed:
