Zycoo ZX50 SERIES User Manual Download Page 33

Page: 33 / 66

ZX50 Series IP PBX

Chapter 4 Advanced

4.1 Options

Options Include local extension settings and new extension default settings.

Click

【

Option

】

to display the dialog as below:

Item

Explanation

Local Extensions

Set up the digit of local extensions

Operator Extension

Set up Operator Extension.

Global Ring Time Set(s)

Set Ring Time for each extension.

Enable Transfer

Enable transfer feature key.

Enable Music On Ringback

Enable music on ringback.

Allow multiple extensions to

be assigned to one analog

phone

Allow multiple extensions to be assigned to one

analog phone.

Allow extensions to be Alpha

Numeric (SIP/IAX users)

If extension is Alpha, outside line can't call in, but

extension can call out.

VoiceMail

This user will have a voicemail account after

choosing this option.

NAT

Check this option if the User or Phone is located

behind a NAT (Network Address Translation)

enabled gateway.

SIP

Check this option if the User or Phone is using SIP or

is a SIP device.

IAX2

Check this option if the User or Phone is using IAX2

Summary of Contents for ZX50 SERIES


































































Search results

Summary of Contents for ZX50 SERIES

Reviews:

Related manuals for ZX50 SERIES

Brands by name

Popular brands

Zycoo ZX50 SERIES, User Manual

Search results

Summary of Contents for ZX50 SERIES

Reviews:

Related manuals for ZX50 SERIES

Brands by name

Popular brands