Zycoo CooVox T200, Quick Installation Manual

Page: 8 / 20

5
4FXS Module
4FXO Module
4GSM Module
2FXOS Module
2GSM Module
Module Installation
+
4 3 2 1
+
+
4 3 2 1
+
SLOT1
+
ANT
USB CONSOLE
ETH RST DC 12V
-
Product Installation
This IP PBX can support installing two extension modules at the same time. Optional
modules are as follows.
2WCDMA Module
4WCDMA Module
Check if the module is clean and intact.
Please ensure the power of IP PBX is cut off.
Please ensure the direction of the module is correct (ZYCOO-logo side up).
Push the module into the module slot through the guide rail.
Tighten the locking screws on both ends of the module.
1
2
3
4
5
1.Do not touch any device on the module, just to prevent the module from being
damaged by static electricity.
2.This operation must be done with power cut off. The module does not support
hot- plugging.
Caution: