Zycoo CooVox T200, Quick Installation Manual

Page: 5 / 20

2
Hardware Installation
To avoid any device damage and bodily injury caused by improper use,
please observe the following rules.
The followings are the instructions for setting up ZYCOO CooVox-T200 IP PBX.
Please refer to the illustration and follow the simple steps below to quickly install your
IP phone system.
Safety Precautions
1
2
3
4
5
Please make sure that the power is kept off during the whole installation process.
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a
good skin contact and is well grounded.
The device works only under the correct power supply. Please confirm that the
power supply is consistent with the voltage marked by the device, and it is
suggested to use the included power supply.
Before the device is powered on, please confirm that the power circuit will not be
overloaded so as not to cause unnecessary damage.
To avoid the risk of electric shock, do not open the casing when the device is
working!
Before cleaning the device, cut off the power supply. Do not clean it with a
waterish material; never use any other liquid cleaning method.
6