RL- User Guide and Install Manual
Page 7
STEP 5
: Local Save
Once all parameters are set you are required to do a Local Save.
STEP 6
: Encoder Setup
Select the
Encoder 1, 2, 3, 4 tab
to program an individual encoder.
Select and change
all desired parameters.
NOTE:
There is an Encoder tab present
for each input on the device.
STEP 7
: Local Save for each Encoder tab
Once all parameters are set you are required to do a Local Save on EACH Encoder Tab where changes were performed
IMPORTANT NOTE:
Ensure all Encoder changes
have been locally saved before
performing Step 9.
Note: Local
Save function will
indicate the local
change made
Upload and Reboot after all changes have
been made and a Local Save performed
