Zwilling ENFINIGY 53003, Operating Instructions Manual

Page: 28 / 144

28
GB Fault / Customer Service / Disposal
Problem Possible cause Remedy
All program
symbols are
flashing on the
blender base.
The blender bowl was re-
moved from the base during
operation.
Put the selector switch in the on/
off position. Then put the blender
bowl back on and continue as
desired.
The selector switch is not in
the on/off position when the
blender is plugged in. Put the selector switch in the
on/off position and continue as
desired.
The motor has overheated.
Put the selector switch in the on/
off position and wait 30 minutes.
It is not possi-
ble to start the
mixing process.
The blender bowl does not
sit properly on the base. Place the blender bowl on the
base by pressing it down.
Customer service
Please contact our customer service should you encounter any problems with
your blender.
Detailed information on service, repairs, warranty and product registration can
be found at www.zwilling.com/service.
Disposal
With regard to disposal, please return your old appliance to a collection point
for electrical appliances.