8
* MATRIX MODE allows the selection of any RS-232 port 1~4 to work with any of the HDBaseT ports 1~4, In
this example the R-232 port 1 is transmitting to multiple receivers that are connected to HDBaseT port 1, 2, 3
and the RS-232 port 4 is transmitting to HDBaseT port 4 only.
IR TX SETTING: (Default IR TX: O O O O)
This option is used to setup whether the IR signal will be sent from the MATRIX IR to the receiver connected
to HDBaseT port 1~4. To control a remote device, setting should be O for on and X is for off.
After entering the IR TX SETTING menu, press ENTER, the bottom line of text will start to flash, press the UP
or DOWN button to select O or X, then press ENTER to confirm setting.
Summary of Contents for MAHCL4X4
Page 6: ...4 CONNECTION DIAGRAM...
