ZuumMedia D1080P-3.6MM-IR6-WH User Manual Download

Page: 11 / 69

Getting Started

1.3 ONVIF Compatibility and Included Software Overview

This camera is ONVIF v2.1 compliant. It is designed for interoperability with
popular VMS’s and NVR’s*, with backwards compatibility to ONVIF v.1.02. For
more information on ONVIF, visit

www.onvif.org

NOTE:

Provided software is PC compatible only; Mac OS® access to the

cameras is available via Safari® browser only.

1.3.1 NVMS

•

NVMS is a client-only solution that supports up to 36 IP

cameras.

NVMS is a free software provided on the CD.

• NVMS supports all the features of the camera. It can access micro SD/

SD card recordings and camera setup over a local network.

• NVMS manual is provided on the CD.

1.3.2 CD Tools

•

CD contents Folders

IP Search

; Search find IP Cameras and set IP address and gateway

NTP Service Tool

; Time Sync Application: IP devices match one PC system time.

FTPUpdater

; Firmware Update tool

IP Support Help Files

; Website support help documents for common problems.

RTSP Tool

; provides RTSP string command f. e.g VLC or Quick-time use

SD Driver

; Ext2 driver for Windows XP to read sd Memory card on PC

Onvif_Help

; documents on Onvif specifications

Open the NTP service

; Windows XP only enables NTP time to be enabled.

Adobe Flash Player

; Flash Video player for Windows IE plugin and Apple Mac OS

Adobe AcrobatReader

; Windows and Max OS Acrobat Reader v10

Files:
IP_series_bitrate_calculator.htm

; Simple storage calculator for IP devices

NVMS_Install.exe

; NVR Software installation for PC

NVMS_Manual_1.7.pdf

; Guide to use the NVMS Software

SNMedia_Player.exe

; File Player for recorded files / backup files from devices /

NVMS.

Summary of Contents for D1080P-3.6MM-IR6-WH






































































Search results

Summary of Contents for D1080P-3.6MM-IR6-WH

Reviews:

Related manuals for D1080P-3.6MM-IR6-WH

Brands by name

Popular brands

ZuumMedia D1080P-3.6MM-IR6-WH, User Manual

Search results

Summary of Contents for D1080P-3.6MM-IR6-WH

Reviews:

Related manuals for D1080P-3.6MM-IR6-WH

Brands by name

Popular brands