background image

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of five years from the date 

of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are notified in 

writing of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly maintained and 

used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages whatsoever, includ

-

ing incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the defective goods. Before 

installation and use, the purchaser shall determine the suitability of the product for his intended use and the purchaser assumes all risk 

and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability is expressly excluded. If the 

products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to a period of three years and shall be 

limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are approximate and are not guaranteed.

Sensor-Operated Concealed Systems

Sensor-Operated Exposed Systems

ZEMS6000AV

ZEMS6200AV

ZEMS6000AV-2

ZEMS6200AV-2

ZEMS6000AV-3

ZEMS6200AV-3

ZEMS6001AV

ZEMS6201AV

ZEMS6003AV

ZEMS6203AV

AquaSense

®

ZEMS G2 Series

Automatic Systems Sensor-Operated

Flushometer

Installation, Operation, Maintenance

and Parts Manual

Patented and Patents Pending

ZEMS6140AV

ZEMS6240AV

ZEMS6152AV

ZEMS6252AV

ZEMS6153AV

ZEMS6253AV

ZEMS6190AV

ZEMS6290AV

ZEMS6195AV

ZEMS6295AV

ZEMS6197AV

ZEMS6297AV

WARNING

: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA: 

Cáncer y daño reproductivo - www.P65Warnings.ca.gov

AVERTISSEMENT: 

Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

Summary of Contents for ZEMS6000AV













Reviews: