FV806 Rev. A 09/07/21
Page 5
Overview:
-W1 & -W2 Only:
Zurn connected faucets transmit data 24/7 to the Zurn plumbSMART™* web portal and mobile app. Proactively
monitor your faucet activations and water usage, receive real-time alerts for preset high and low usage parameters,
and access system data for trends and predictive maintenance anytime and anywhere.
All Configurations:
AquaSense® sensor faucets are ideal for high-use applications where durability and hands-free operation are
necessary. ADA compliant, battery powered, polished chrome-plated cast brass sensor faucet with infrared proximity
sensor for retrofit and new construction. Unit is furnished with a standard 0.5 GPM aerator and mounting hardware.
Zurn Lead Free products (-XL) are designed and manufactured to comply with Section 1417 of the Safe Drinking
Water Act (SDWA) which mandates the weighted average lead content of no more than 0.25% of the wetted surface.
Specifications (Ceramic Valve):
Power:
7.5 VDC external power supply for faucet and -W1 endpoint
P6000-ACA: 800 mA maximum output
P6000-HW6: 2 A maximum output
Sensor Range:
Fixed
Operating Water Pressure:
10-125 psi
Operational Water Temperature:
33°F to 140°F (1°C to 60°C)
Aerator:
0.5 GPM Vandal-Resistant (Standard)
Specifications (Solenoid Valve):
Power:
6 VDC Series [4 “AA” (Alkaline ONLY)] for faucet
6 VDC Series [4 “AA” (Alkaline or Lithium)] for -W2 monitor
Sensor Range:
Fixed
Operating Water Pressure:
10-125 psi
Operational Water Temperature:
33°F to 140°F (1°C to 60°C)
Aerator:
0.5 GPM Vandal-Resistant (Standard)
Electronic Emission Notices (-W1/-W2):
The following information refers to Zurn Smart Connected Products, types: -W1 and -W2. This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference intended for use in non-residential/non-domestic environments. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult an authorized dealer or service representative for help.
Zurn is not responsible for any radio or television interference caused by using other than specified or recommended cables and con
-
nectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s
authority to operate the equipment.
Solenoid Valve Box
Ceramic Gear Valve Box
