FV806 Rev. A 09/07/21
Page 10
2. Connect sensor inline connector to electronics module and
hydrogenerator.
Z6950 Series
Battery Powered
Sensor Faucet
MADE IN XXX Form No. FV559
Electronics Module Installation Instructions (-HYD)
4. Tighten electronics module assembly with hydrogenerator to
shank and connect water line(s).
1.
Connect hydrogenerator(A) downstream of electronics
module(B) and filter(C) to bottom of electronics module.
B
A
C
7. Connect sensor inline connector to sensor cable from spout.
3. Open battery module using supplied Allen wrench and install
supplied alkaline batteries in the electronics module.
5. Ensure sink is clear of tools/debris and is in normal operating
condition. Remove protective film from sensor lens if needed.
6. Turn on water supply(ies).
