background image

®

AquaSense

®

ZTS6200

Automatic Sensor-Operated,

Battery-Powered Flushometer

Installation, Operation, Maintenance,  and

Parts Manual

Patented and Patents Pending

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the date of purchase. Decorative

finishes warranted for one year. We will replace at no costs goods that prove defective provided we are notified in writing of such defect and the goods are returned to

us prepaid at Sanford, NC, with evidence that they have been properly maintained and used in accordance with instructions. We shall not be responsible for any labor

charges or any loss, injury or damages whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement

of the defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the purchaser assumes all risk and

liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability is expressly excluded. If the products sold hereunder are

“consumer products,” the implied warranty of merchantability is limited to a period of three years and shall be limited solely to the replacement of the defective goods.

All weights stated in our catalogs and lists are approximate and are not guaranteed.

AquaSense Exposed
Closet/Urinal System
ZTS6200-WS1
ZTS6203-WS1
Flushometer for Water Closet

Sensor-Operated, Battery-Powered  Valve

Summary of Contents for AquaSense ZTS6200







Reviews: