background image

WARNING

: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA: 

Cáncer y daño reproductivo - www.P65Warnings.ca.gov

AVERTISSEMENT: 

Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

Power Options:

Battery (Standard)

-LL (Long Life Battery)

-HW (Hardwired using 7.6 VDC Power Supply Input)

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the date of purchase. 

Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are notified in writing of such defect and the 

goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly maintained and used in accordance with instructions. We shall 

not be responsible for any labor charges or any loss, injury or damages whatsoever, including incidental or consequential damages. The sole and exclusive 

remedy shall be limited to the replacement of the defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his 

intended use and the purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability 

is expressly excluded. If the products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to a period of three years and 

shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are approximate and are not guaranteed.

NOTICE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT

Water Closet Models:

ZTR6200-ONE  1.1 gpf

ZTR6200EV   1.28 gpf

ZTR6200-WS1  1.6 gpf

Urinal Models:

ZTR6203-ULF   0.125 gpf

ZTR6203-QRT  0.25 gpf

ZTR6203-EWS  0.5 gpf

ZTR6203-WS1  1.0 gpf

AquaSense

®

ZTR Series

Automatic Sensor-Operated Piston 

Type Flushometer for Water Closets 

and Urinals

Installation, Operation, Maintenance

and Parts Manual

Summary of Contents for AquaSense ZTR Series















Reviews: