FV743 Rev. D 07/02/21
Page 2
FV743 Rev. D 07/02/21
Page 1
Overview:
Zurn connected faucets transmit data 24/7 to the Zurn plumbSMART™* web portal and mobile app. Proactively
monitor your faucet activations and water usage, receive real-time alerts for preset high and low usage parameters,
and access system data for trends and predictive maintenance anytime and anywhere.
AquaSense® sensor faucets are ideal for high-use applications where durability and hands-free operation are
necessary. ADA compliant, battery powered, polished chrome-plated cast brass sensor faucet with infrared proximity
sensor for retrofit and new construction. Unit is furnished with a standard 0.5 GPM aerator, and mounting hardware.
Zurn Lead Free products (-XL) are designed and manufactured to comply with Section 1417 of the Safe Drinking
Water Act (SDWA) which mandates the weighted average lead content of no more than 0.25% of the wetted surface
Specifications:
Voltage:
6 VDC Series [4 “AA” (Alkaline or Lithium) and or external power option] for
faucet
7.5 VDC @ 800mA [P6900-ACA / P6000-HW6 with CWB] or P6900-ACA-BA with
CWB for endpoint
Sensor Range:
Self-calibrated, dependent upon sink depth and finish.
Operating Water Pressure:
10-125 psi
Operational Water Temperature:
33°F to 140°F (1°C to 60°C)
Aerator:
0.5 GPM Vandal-Resistant (Standard)
Important Safety Information:
• Installer is responsible for ensuring the product is installed and conforms to all plumbing codes and ordinances.
• Do not convert or modify this Zurn product yourself. All warranties will be voided.
• Water supply lines must be sized according to building designer in order to provide adequate water supply
for each fixture.
• Flush all water lines prior to making connections.
Prior to Installation:
Before installing your Zurn
®
AquaSense® Faucet: the items listed below should already be installed on site.
• Lavatory/sink
• Drain Line
•
Hot and cold water supply line or pre-tempered water supply line.
•
Installer/Servicer should not use pipe dope or teflon/thread sealant anywhere on this product, most notably threads
and connection points.
• Care shall be taken when installing this product to prevent marring of any exposed or decorative surfaces.
Z6922-XL-W1
Z6920-XL-W1
Spout Assembly
Aerator
and Key
Electronics Box
with Ceramic
Valve
Shank
Mounting Kit
Base Gasket
Aerator
and Key
Electronics Box
with Ceramic
Valve
Filter
O-Ring for
Base
Spout Assembly
Required Tools
AquaSense
®
Package Contents
Adjustable Wrench
(Optional)
Smooth Jawed
Wrench
Phillips Head
Screwdriver
3/32”, M3
Allen Wrenches
Filter
Endpoint
Y-Cable
CWB
DC Adapter
NOTE: The information in this manual is subject to change at any time without notice. Installations may be performed
at different times of construction by different individuals. For this reason, these instructions should be left on-site
with the facility or maintenance manager.
Electronic Emission Notices:
The following information refers to Zurn Smart Connected Products, types: -W1. This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference intended for use in non-residential/non-domestic environments. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult an authorized dealer or service representative for help.
Zurn is not responsible for any radio or television interference caused by using other than specified or recommended cables and con
-
nectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s
authority to operate the equipment.
Be sure the water supply is turned on and the sink/lavatory/basin is clear from any objects upon making the sensor to electronics
connection initiating the self-calibration feature. The sink must be clear of any and all objects and water supply is turned on in order
to calibrate appropriately (calibration time approx 30-60sec) (the system will perform both a wet & dry calibration).
