17
(a) Start from any one of the joints created by Step 3. Connect two
part #M and one part #B
with a part #E, a part #H, and a part
#K. Tighten them with the tools part #I and part #J.
(b) Move to the next joint, connect
one part #M and one part #B
with a part #E, a part #H, and a part #K. Tighten them with the
tools part #I and part #J. Repeat until
there is one joint left
.
(c) Finish connecting the last joint of the second layer by adding
one part #B
with a part #E, a part #H, and a part #K. Tighten them
with the tools part #I and part #J.
STEP 4 - FINISH THE THIRD LAYER
4
5
6
1
2
3
Summary of Contents for Dome Climber
Page 15: ... b Repeat until you finish assembling the 10 joints 14 ...
Page 27: ......
Page 28: ...PLAY ENJOY BOND ...
