ZUPAN ZM 400 VCRA Operator'S Manual Download Page 11 | Manualshive

Page: 11 / 57

background image

OCT-16

PAGE 11

1.  Tank made of polyethylene with a scale divided in 10 l.
2.  Tank lid with basket filter.
3.  Clear water tank for hand washing
4.  Clear water tank for system cleaning and thinning of technical leftover
5.  Air deflector with a fan D.700.
6.  Pump AR 1064 with a safety valve.
7.  Remote control with manometer.
8.  Command box
9.  Sucking filter.
10.  Pressure filter.
11.  Ball valve for system washing tank.
12.  Clutch for idle run.
13.  Valve for emptying the tank.
14.  Ball valve in return circle.
15.  Clean water tank pipe.
16.  Tank mixer
17.  Valves (stirrer, powder mixer)
18.  Frame of the sprayer.
19.  Three point connection.
20.  Transmission.
21.  Fan.
22.  Nozzle holder with anti drop valves and ceramic nozzles.
23.  P.T.O. support
24.  Spray rate chart.
25.  Warning sticker.
26.  Type plate.
27.  Adjustable air deflector

6. WORKING PRINCIPE OF THE SPRAYER

The protection agent flows from the tank through the sucking filter to the pump and from pump
under  high  pressure  through  the  pressure  filter  to  both  spraying  sides.  With  the  pressure
regulations valve you can regulate the pressure with the turn the pressure regulation handle to
the right (clockwise) to increase the pressure, or to the left (counterclockwise) to decrease the
pressure.
Before you run the sprayer, turn the regulation handle to the left, so that there is no pressure
on the manometer. When you have working rpm, turn the handle to the right so long, that you
achieve the wanted pressure on the manometer
When the nozzles are closed, all fluid is returning to the tank, when they are operating, a part
of the fluid is for spraying and a part returned in the tank.
Tank mixers must be always on, to secure the homogeneity of the protection agent. When the
level of the fluid sinks under 20 l, you must close them to prevent foaming.

Do  not  work  with  pressure  above  15  bars.  With  to  high  pressure  the
efficiency of  spraying sinks. For a higher range of droplets, increase the rpm
of the fan, not the pressure!

WARNING !

«
...
9
10
11
12
13
...
»

Summary of Contents for ZM 400 VCRA


























































Reviews:

No comments

Related manuals for ZM 400 VCRA

Brand: Paasche Airbrush Pages: 4

Brand: WAGNER Pages: 84

Brand: Labnet Pages: 8

COLORCATALOG 2006 ENGLISH

Brand: WAGNER Pages: 22

Brand: Fast Mover Pages: 8

Brand: WAGNER Pages: 8

Brand: Bisonte Pages: 126

Brand: Graco Pages: 46

Brand: VAUPEL Pages: 10

Brand: SMK Sprayers Pages: 8

Brand: Raven Pages: 11

Ultra Max Mark V

Brand: Graco Pages: 58

POLYSET CR-20 HFO

Brand: ICP Pages: 36

Brand: Gearmore Pages: 55

Brand: Parkside Pages: 54

Zip-Spray-n-Roll 233792

Brand: ASM Pages: 48

Brand: Lemmer Pages: 32

Brand: PSE Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands