7
Turn the bucket lid clockwise to tighten
1
2 . 2 Water filter bucket installation method
Note the water filter bucket cover seal
Place the water filter bucket into the
Host with the bucket lid facing down
2
8
Placement of water filter bucket
Tip: Remove the deodorant box is also
used in a similar reverse step
Holding the deodorant assembly box in your hand, push the deodorant assembly
into the mounting opening along the guide slot and push the deodorant assembly
to the bottom with a little pressure.
2
2.3Deodorization component installation
Reach your fingers into the groove of the front cover and lift the cover outward.
1
Slowly close the front cover
by hand. Note that the lid
suction force is large, careful
to pinch the hand
Grasp the hose sewage tube connector, first Host wire from the hose wire hole
through, then the Host connection part aligned and pressed into, and finally
the hose assembly signal wire and Host wire for line connection.
1
2.4Hose assembly with Host installation
Sewage pipe hose
connect to
Host cable
Turn the hose connector clockwise to lock in the Host connection section
2
