Zumex Group S.A.
Tel. +34 961 301 251 · Fax. +34 961 301 255 · [email protected] ·
Zumex Service
Tel: +34 960 800 999 ·
www.zumexfoodengineering.com
!
Warning: Unplug the cable from the general
switch.
Rinsing.
Then, apply water directly on the entire inte-
rior to avoid leaving traces of pulp.
The sections of the control panel should be
washed with a damp cloth, since it is suscep-
tible to splashing.
*
Final rinse.
We apply water through a hose and clean
all exterior areas. (Do not use high pressure
water).
We open the feeding hooper and with water
we drive all the pulp towards the exit mouth.
Degreasing.
Cleaning procedures for areas with internal drainage
Cleaning procedures at areas with backoffice and internal drainage.
Attention:
For this practice, we must move away the control panel from the water spray area. Beside this, place a Juice tank at the
juice tank support in order to collect all the residual water used during the cleaning process.
Warning!
Place a tank at the juice tank support to collect all residual water.
Disinfection.
* Warning!
Avoid water apply at high water through the ventilation grilles of the engine covers.
1
7
4
2
8
5
3
9
6
