8 Care and maintenance
▸ Remove all traces of cleaning agent, otherwise the non-stick properties of the coating
could be affected.
In the case of stubborn soiling in appliances without pyrolysis:
▸ Use a commercially available oven cleaner and follow the manufacturer’s instructions.
8.3
Cleaning the baking tray
Non-stick properties can be adversely affected.
Do not use any abrasive, acidic or highly alkaline cleaning agents. Do not scour
the surface.
▸ Remove any soiling or residues of cleaning solution immediately.
8.4
Pyrolytic self-cleaning
Risk of burns from hot surfaces!
The appliance front gets hotter than during normal operation. There is likely to be
some smoke given off for a short period of time so ventilate the room during pyro-
lysis. Do not leave the appliance unattended.
Roughly remove grease and oil deposits and baked-on deposits beforehand. Do
not use any chemical cleaning agents. Residues of cleaning agents can cause
chemical reactions, destroy the enamel and give off poisonous fumes.
In pyrolytic self-cleaning, any soiling is burned off at a high temperature. Afterwards the
deposits can easily be removed with a damp cloth. Over time with use the cooking
space can turn matt. Fruit acid and fatty acid deposits can leave stains. This will not af-
fect the cooking or baking characteristics of the appliance nor affect its functioning.
Pyrolytic self-cleaning – including cooling down – takes 3–5 hours depending on
the degree of soiling.
As long as the temperature is over 300 °C, the illumination and the heatable appli-
ance drawer switch off and cannot be switched back on.
Selecting and starting pyrolytic self-cleaning
Damage to accessories from self-cleaning!
Remove accessories, shelf guides, fully extending runners, cookware and any
other objects from out of the cooking space. Otherwise they can become discol-
oured and their surface rough. The rolling properties of full extension roller runners
deteriorate.
▸ Close the appliance door.
▸ Long touch the display.
▸ Select the application.
▸ Select the degree of soiling.
–
The calculated end time for pyrolytic self-cleaning is shown in the display.
▸ Touch «Start» to start pyrolytic self-cleaning.
–
The appliance door locks.
Delayed start
The start of pyrolytic self-cleaning can be delayed, for example, to take advantage of
lower electricity tariffs.
▸ Select before starting.
▸ Set the desired end time.
50
Summary of Contents for Combair V4000
Page 67: ...14 Index W Warming plates in the cooking space 41 Wire shelf 13 WLAN connection 45 67...
Page 68: ...68 15 Notes...
Page 69: ...69...
Page 70: ...70...
