ZUG BCXSE60, Operating Instructions Manual

Page: 17 / 52

5 Using the appliance
▸ To start operation immediately, i.e. without Press and go, select .
– If set, the countdown to the time remaining appears in the display and in the digital
display.
The operating mode selected cannot be changed once it has started.
Display overview
곍6HWWHPSHUDWXUH
굴 굵 굶
K
3
1
2
4
6
5
1
Operating mode settings
2
Press and go
3 Operating mode with symbol
4 Current position of the adjusting knob /
selected setting
5 Set values / recommended values
6 Symbols for settings
5.2 Checking and changing the settings
▸ Select the symbol for the desired setting.
▸ To change the value, turn the adjusting knob to the right or left.
▸ Press the adjusting knob to confirm the setting.
– The operating mode settings are displayed.
– The changed value can be seen above the corresponding symbol.
The end time can only be changed during the first 60 seconds of
operation.
5.3 Setting a duration
The operating mode selected ends automatically when the operating time is up.
▸ Select the desired operating mode.
▸ Select
in the operating mode settings.
▸ Set the desired duration – max. 9 hours and 59 minutes – and confirm.
– The duration is displayed in the operating mode settings as well as the end time
which is calculated based on this value.
– End of operation / duration finished (see page 21)
5.4 Setting a delayed start / end time
The delayed start is activated when for the operating mode selected both the duration
and the end time are set.
The appliance switches automatically on and off again at the desired times.
If you use the food probe, you will need to estimate and set the duration. You will find a
guide on times in «EasyCook». The appliance switches on with a delay and switches off
again when the set target temperature is reached. Depending on the estimated duration,
this can occur earlier or later than the set end time.
Perishables should not be kept unrefrigerated.
17