Zubler VARIOstar D50, Operation Manual

Page: 13 / 24

13
29
27
30
32
28
31
ope
n
clos
e
Tool change:
The chuck on the handpiece is opened or
closed by turning the grip
27 .
The chuck 30 is opened and the tool can
be removed.
After inserting the tool the chuck 30 is clo-
sed again by turning the grip 27 in the
opposite direction.
An optional 3.00 mm chuck can be used
(see 2.1)
In order to avoid deformation of the
chuck, a tool or the pin provided must
always be inserted in the chuck.
Check before using the handpiece that
the tool is seated firmly and cannot be
pulled out.
Only change the tool with the motor
turned off!
1.2 Handling the handpiece
27 Grip
28 Cap
29 Pin
30 Chuck
31 Tip
32 Motor cable
Page
Fig . 13