25
2.3.11 Restore factory settings
All settings are reset to the factory set-
tings here.
This area can be protected by assigning
a password.
This cannot be undone.
All programs on the oven will be
deleted.
2.3.12 Oven Upgrade
Your Zubler oven is available in various
versions which differ in their functionality.
If, after purchasing the device, you wish
to switch to a different furnace version (if
the device hardware allows this), this can
be attained by activating it in the soft-
ware.
To do this, you request a basic code
under this menu item, which you send to
your dealer or to us at Zubler Gerätebau
GmbH. You will then receive an activa-
tion code which you can enter in this
menu area. You confirm this code with
the green
OK
button and the oven then
switches to the desired device version.
The activation code can only be
used for one day at a time.
2.3.10 Service menu
Password protected service area for
customer support
500°C
Top limit switch
Off
On
Lower limit switch
0
Back
Display, Status: Settings / Vacuum, lift / Lift test
Lift test
Lift position
Image 29.1
2.3.9 lift test
The function of the lift system can be
checked during the lift test.
Three values are displayed for this:
Top limit switch:
when the lift is com-
pletely closed, this position is named
On. If the lift opens, the information
changes to Off
Lower limit switch:
when the lift is
fully open, this position is described as
On
. If the lift is closed, the information
changes to
Off
Lift position:
this is described with a
code. When the lift is completely clo-
sed, the numerical value 100 is display-
ed; when the lift is completely open,
the value is 0.
Corresponding intermediate values are
displayed on closing.
Summary of Contents for VARIO S 430
Page 1: ...Made in Germany VARIO S 430 EN09 2022 ...
Page 2: ...2 ...
Page 29: ...29 5 Warranty 5 1 Cleaning the heating chamber see point 2 5 7 ...
Page 31: ...31 ...
