Zubler VARIO S 430, Manual

Page: 18 / 32

18
<250°C
<250°C
<250°C
2.3 Settings
Settings
take you to the "Service level"
of the menu. Various basic settings can
be adjusted here, service programs can
be carried out and data can be transfer-
red (software, program and log data).
Pressing the red
Main menu
field takes
you back to the Main Menu.
Main menu
Display, Status: Settings
Settings
Basic settings
Initial oven setup
Data transfer
Firmware update /
Firmware version
Customize calibration
Last error message
Regeneration program
Muffle hours
Service menu
Factory settings reset
Upgrade oven
1 Import all folders
Q If there is already a corresponding
folder on the USB stick, this will
be recognized by the oven and the
Import all folders
function field will
be activated (dark grey background)
(image 20.2).
Q If this field is now activated, the
furnace opens a list with all the
corresponding data. Select the
desired data record, the green
Import
function field is activated.
The required data record is loaded by
pressing this button (image 20.3).
2.3.1 Data transfer
Included with your Zubler ceramic
furnace a USB data stick (flash drive) is
enclosed.
With the help of this USB stick you can
transfer program datas (from the oven to
USB or from USB to oven) or log datas
for quality assurance to save. When the
oven detects the USB stick, all active
function fields are highlighted (image 20.2).
When using a third-party data medium,
problems may arise during data trans-
fer. If the USB stick is not recognized, all
function fields remain inactive.
Pressing the red Settings control panel
takes you back to the settings area.
All folders and programs on the
furnace will be overwritten!
Display, Status: Settings / Data transfer / Import all folders / one folder selected
Display, Status: Settings / Data transfer
Import all folders
Import Abort
Settings
Import all folders
Export all folders
Import one folder
Export one folder
VS430_01-001001-22_2022-02-22_13-12
VS430_01-001001-22_2022-03-15_08-45
VS430_01-001001-22_2022-04-12_10-23
VS430_01-001001-22_2022-04-27_09-15
VS430_01-001001-22_2022-05-02_11-25
VS430_01-001001-22_2022-05-06_14-26
Protocol files
Alle Protokolle löschen
Data transfer
Image 20.1
Image 20.3
Image 20.2
lift