Yes
Yes
Yes
Yes
Mantis 125A SBEC 5A
Mantis 155A SBEC 5A
Mantis 90A OPTO HV
Mantis 120A OPTO HV
2125211
2155211
2090411
2120411
125A\150A
155A\200A
90A\100A
120A\150A
5-18NC\2-6Lipo
5-18NC\2-6Lipo
18-38NC\6-12Lipo
18-38NC\6-12Lipo
145
147
128
142
5.0V,5.5V,6.0V
adjustable/5A
5.0V,5.5V,6.0V
adjustable/5A
48x80x21
Mantis 150A OPTO HV
2150401
Yes
150A\180A 18-38NC\6-12Lipo
142
Yes
Type
Mantis 85A OPTO
PN#Model
Cont.\Burst
Current(A)
Battery
cell
NiXX\Lipo
Weight
(g)
BEC
Output
Size(mm)
W*L*H
User
Program
2085301
85A\100A
5-18NC\2-6Lipo
47
35x47x11
5.0V,5.5V,6.0V
adjustable/5A
2085201
85A\100A
5-18NC\2-6Lipo
35x47x15
Yes
57
Mantis 85A SBEC 5A
Features:
◆
Super smooth and accurate throttle linearity
◆
Safety thermal over-load protection
◆
Auto throttle shut down in signal lose situation
◆
Low Voltage Cut off
◆
Governor Mode
◆
Strong BEC Output
Multiple Protection
1. Over-heat protection: When the temperature of ESC exceeds 110 deg C, the ESC will reduce
the output power to allow it too cool.
2. Lost signal protection: The ESC will automatically cut power to the motor when it detects a
lost of throttle signal for 2 seconds, then the motor will emit continuous beeping tone.
Mounting your ESC
1. Choose a location that has good airow to offer best cooling to prevent overheating. DO
NOT cover the side with the at heat shield with hook and loop tape or any other material as
this will greatly lower its effectiveness.
2. Mount the ESC with a combination of hook and loop tape or 2-sided foam tape.
THROTTLE CALIBRATION
1. Turn on your radio and keep the throttle stick at the to position (100%).
2. Connect the battery pack to the ESC. Wait for about 2 seconds, the motor will beep for
twice, then put the throttle in the minimum position, the motor will also beep, which indicates
that your ESC has got the signal range of the throttle from your transmitter.
3
48x80x21
48x80x21
48x80x21
48x80x21
