ZTEWelink MF206A Hardware Development Manual Download Page 2

Page: 2 / 88

Hardware Development Guide of Module Product

MF206A

Legal Information

By receiving the document from Shenzhen ZTEWelink Technology Co., Ltd (shortly referred to as

ZTEWelink), you are deemed to have agreed to the following terms. If you don’t agree to the

following terms, please stop using the document.

contains ZTEWelink’s proprietary information. Without the prior written permission of ZTEWelink,

no entity or individual is allowed to reproduce, transfer, distribute, use and disclose this document or

any image, table, data or other information contained in this document.

is the registered trademark of ZTEWelink. The name and logo of ZTEWelink are

ZTEWelink’s trademark or registered trademark. Meanwhile, ZTEWelink is granted to use ZTE

Corporation’s registered trademark. The other products or company names mentioned in this

document are the trademark or registered trademark of their respective owner. Without the prior

written permission of ZTEWelink or the third-party oblige, no one is allowed to read this document.

The product meets the design requirements of environmental protection and personal security. The

storage, use or disposal of products should abide by the product manual, relevant contract or the laws

and regulations of relevant country.

ZTEWelink reserves the right to make modifications on the product described in this document

without prior notice, and keeps the right to revise or retrieve the document any time.

If you have any question about the manual, please consult the company or its distributors promptly.

Summary of Contents for MF206A
























































































Search results

Summary of Contents for MF206A

Reviews:

Related manuals for MF206A

Brands by name

Popular brands

ZTEWelink MF206A, Hardware Development Manual

Search results

Summary of Contents for MF206A

Reviews:

Related manuals for MF206A

Brands by name

Popular brands