10
10
10
Wireless Network Card Usage
Guidelines
Notice
Restrictions
�
The wireless network card is designated to the W200C USB wireless network card provided by
ZTE.
�
It is recommended to use the ZXV10 W300 residential gateway device of ZTE to get the best
performance.
Installation Prerequisites
It is recommended to conform to the following prerequisites for good performance of the device:
�
There is no obstacle between AP and wireless network card of STB.
�
The signals of AP and STB wireless network card are in strong status.
�
The wireless network card is equipped with extension line, which is convenient for position and
angle adjustment.
Operation Steps
1.
Make sure that the STB is powered off. Insert the wireless network card into the USB interface.
Note:
It is forbidden to insert/pull out the wireless network card during usage.
2.
Switch on the STB, and then the prompt information
Now connecting, please wait...
is displayed
on the TV screen. Input the password when the dialog box
Input Password
pops up.
3.
Press
SET
on the remote control to enter the
EPG
page. Input the password when the dialog
box
Input Password
pops up. And open the
Configuration
page of STB.
4.
Select
Basic Settings
to open the
Network Connection
page. Select
WLAN
mode.
5.
Select
Next
to open the
Services Settings
page.
Note:
Make sure that the wireless network card is well connected.
20
