Zte ZXR10 3800-8, Handling Manual

Page: 171 / 307

Chapter 2 Alarm Message
ONU registration command examples ( < slot > is the slot number
of epon single board ).
1. The registration that doesn't need binding mac.
i. hardware-authentication card < slot > disabled
ii. auto-authentication card < slot > enable
2. The registration that need binding mac.
i. hardware-authentication card < slot > enable
ii. auto-authentication card < slot > disabled
iii. onu < onuid > type < type-name > mac < macAddr >
Parameter description:
Parameter Description Range
onuid ONU ID 1~32
type type-name
ONU model name ZTE-D400 ZTE-
D402 ZTE-
D420ZTE-D421 ZTE-
D422 ZTE-F401 ZTE-
F425 ZTE-F429 ZTE-
F430 ZTE-F435
ZTE-F500 ZTE-F820
mac macAddr ONU MAC address
-
Example: if epon single board is in slot 5
1. The registration that doesn't need binding mac.
ZXR10(config-epon)#hardware-authentication card 5 disabled
ZXR10(config-epon)#auto-authentication card 5 enable
2. The registration that need binding mac.
ZXR10(config-epon)#hardware-authentication card 5 enable
ZXR10(config-epon)#auto-authentication card 5 disabled
ZXR10(config-if)#onu 1 type ZTE-F425 mac 0015.eba3.c6c9
Alarm Description
Prototype
"Epon alarm onu registration-error occour!"
Example:
18:41:30 08/26/2008 UTC alarm 33286 occurred %EPON% Epon
alarm registration-error occour! sent by NPC 3
Alarm Description ONU fails to register.
Supported Devices
EPON project of 4822
33287
Message No. 33287
Default Security
Level
5
Alarm Type "CommunicationAlarm"
NM Level 4
Confidential and Proprietary Information of ZTE CORPORATION 139