Zte ZXHN H267N, Management Manual

Page: 55 / 112

Chapter 3 Configure the Internet
6. Click Apply button to apply the changes.
– End of Steps –
3.9.2 Configure the MLD
The section describes how to configure MLD . MLD provides the parameters of MLD
configuration features.
Steps
1. On the main page of the ZXHN H267N, select Internet > Multicast > MLD to go to
the MLD page.
The page is shown in Figure 3-33 .
Figure 3-33 MLD Configuration Page
MLD Mode
2. Enable the MLD Mode.
Note:
l
Click All On to select all MLD functions.
l Click All Off to cancel all MLD functions.
3. Click Apply button to apply the changes.
WAN Connection
4. Click MLD WAN Connection to open MLD WAN Connection page, as shown in
Figure 3-34 .
3-39
SJ-20140702105807-002|2014-11-13 (R1.0) ZTE Proprietary and Confidential